It is mainly used for filling and sealing of high-grade indoor and outdoor LED display screen, LED lamp products, and electronic components such as non fully sealed circuit board, playing the role of sealing, waterproof and moisture-proof.
* because the colloid contains filling materials, the colloid placed for a long time will be layered and the filler will precipitate. Before use, mix the A / B / C components evenly, and then put them into the mixing tank according to the mass ratio of 10:1.
* pour the mixed rubber into the device to be potted. Generally, vacuuming is not necessary. If conditions permit, it is recommended to refill after vacuuming. This product is room temperature curing type. The curing speed of adhesive has no great relationship with curing temperature, but has a great relationship with the proportion content of agent B. the larger agent B is, the faster the curing speed is (it is suggested that the adjustment range of agent B is 100:7-100:12). Generally, it takes about 8 hours to cure at room temperature.
* Unused rubber materials shall be sealed for storage. The storage period is 6 months (25 ℃). The mixed rubber should be used up once to avoid waste.
* this product is not dangerous, but it is not allowed to enter or eyes.
* transportation: no domestic (cn-gb), International (IMO, IATA, UN) regulations. Non dangerous goods.

Characteristic:
* component a of this product is black viscous liquid and component B is transparent liquid. Two copies can be preserved for a long time before mixing.
* this product has good insulation, elasticity, corrosion resistance, weather resistance and other characteristics. After curing, the colloid can be used in a wide temperature range. During the curing process, ethanol molecules are released, which will not cause corrosion to PC & nbsp; (poly carbon), PP, ABS, PVC, copper wire and other materials. It has good adhesion to most electronic accessory materials (except PP and PE).
* no shrinkage during curing, good waterproof, moisture-proof and anti-aging properties.
* meet the requirements of EU ROHS directive.