It is mainly used in places with high requirements for weather resistance. For example, the waterproof and moisture-proof of outdoor lighting equipment and other outdoor products, the sealing of solar cell module frame, the sealing of solar lamp, and the junction box of solar cell module play the role of bonding and sealing.  
* first clean and dry the surface of the object to be adhered, then cut off the nozzle head according to the amount, and seal it. Squeeze the hose by hand or install a special syringe to extrude it. After use, pay attention to the sealing cap, and pay attention that the thickness of the application should not be more than 6mm. Avoid contact with eyes during the application. The complete curing time of the product is 8-12 hours.
* Unused rubber materials shall be sealed for storage to avoid rain and exposure. The storage period is 6 months (below 25 ℃).
* this product is non-toxic and non dangerous, but do not enter or eyes.
* transportation: no domestic (cn-gb), International (IMO, IATA, UN) regulations. Non dangerous goods.

performance index
Before curing: ① external view: white paste; ② product type: condensation type; ③ viscosity; surface dry time (min, 25 ℃): 5-20 & nbsp; ④ specific gravity: 1.50 & plusmn; 0.05
After curing: ① elongation: 300-500; ② tensile strength: 1.90; ③ volume resistivity: 1.0 & times; 1014
&Nbsp; & nbsp; & nbsp; & nbsp; & nbsp; & nbsp; ④ dielectric strength (kV / mm): 18-22 & nbsp; ⑤ bonding strength (MPA): & Ge; 1.90 & nbsp; & nbsp; ⑥ hardness & nbsp; & nbsp; (Jisa, 200 ℃): 45-50

 

Cs-815 special sealant for solar photovoltaic has the following characteristics:
* this product is a single component organosilicon compound in white paste form.
* this product has good high and low temperature resistance, excellent ultraviolet aging resistance, ozone resistance, yellowing resistance, rain resistance, dirt resistance, hail impact resistance and other characteristics. After curing, the colloid can be used in a wide temperature range.
* room temperature neutral curing, fast deep curing, no shrinkage during curing, good waterproof, moisture-proof and insulation performance.
* meet the requirements of EU ROHS directive